ISL6420AIRZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QFN |
| Number of Pins | 20 |
| Published | 2000 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO AVAILABLE AS LOW AS 0.6V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Max Supply Current | 20A |
| Current - Output | 20A |
| Quiescent Current | 2mA |
| Frequency (Max) | 1.4MHz |
| Voltage - Output | 27.5V |
| Input Voltage (Min) | 5.6V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1.4MHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 96 % |
| Duty Cycle (Max) | 100 % |
| Height | 880μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL6420AIRZ Overview
As a result of QFN compact design, the switching controller is compatible with most applications. For outputs of 1, this dc motor controller is suitable. The switching controller can be switched at 1.4MHz. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at QUAD. A variety of dc switching's functions can be performed on 20 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. 20 pins are present on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 5.6V. DC regulator outputs 5V voltage based on test statistics. The dc to dc regulator can only accept a maximum input voltage of 28V. voltage regulator dc to dcs with a 96 % duty cycle are designed to be reliable when powered on and powered off. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. The value of DC to DC voltage regulator is set at ALSO AVAILABLE AS LOW AS 0.6V in order to fulfill the requirements more effectively. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 12V. Keep dc regulator at a temperature of -40°C or above. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. As a whole, there are 1 function(s) in the switch converters. DC switchings that are dormant use 2mA. We design voltage regulators switchings with 20 pins. It is possible for the controller to switch at a frequency of 1.4MHz. Input values of 20A make it ideal for switching controllers. As a result of normalworking processes, a voltage of 27.5V is output. Components may become damaged if their current exceeds 20A.
ISL6420AIRZ Features
Switching Frequency: 1.4MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
ALSO AVAILABLE AS LOW AS 0.6V
ISL6420AIRZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL6420AIRZ DC to DC converter applications.
- Medical equipment
- Automatic testing equipment
- Ball screw pair
- Printing
- Wide-range voltage regulation circuits
- Hydraulic presses
- Radio equipment
- Direct power supply system
- Digital video recorders
- Computer-related products
