ISL6420AIRZ-TK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QFN |
| Number of Pins | 20 |
| Packaging | Digi-Reel® |
| Published | 2000 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO AVAILABLE AS LOW AS 0.6V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 5V |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 20A |
| Quiescent Current | 2mA |
| Frequency (Max) | 1.4MHz |
| Voltage - Output | 27.5V |
| Input Voltage (Min) | 5.6V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1.4MHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 96 % |
| Duty Cycle (Max) | 100 % |
| Height | 880μm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL6420AIRZ-TK Overview
Capsuled in the QFN package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. There is a Digi-Reel? solid enclosure around the pmic. There is a switch at 1.4MHz that can be used with this controller. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at QUAD. There are many different types of terminations for 20. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. There are a total of 20 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 5.6V. According to the test statistics, DC regulator outputs 5V voltage. At most, the dc to dc regulator accepts 28V input voltage. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 96 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. The value of DC to DC voltage regulator is set at ALSO AVAILABLE AS LOW AS 0.6V in order to fulfill the requirements more effectively. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 12V. At least -40°C°C is recommended. At85°C, dc regulator should run. The switch converters have 1 function (s) in total. DC switchings that are dormant use 2mA. A voltage regulators switching with 20 pins is designed. There is a maximum frequency of 1.4MHz that the controller can switch at. Ideally, it is suited for switching controllers with a 20A input. normalworking processes output 27.5V voltage.
ISL6420AIRZ-TK Features
Switching Frequency: 1.4MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
ALSO AVAILABLE AS LOW AS 0.6V
ISL6420AIRZ-TK Applications
There are a lot of Intersil (Renesas Electronics America) ISL6420AIRZ-TK DC to DC converter applications.
- Linear guide
- Various precision measuring instruments
- Automatic testing equipment
- CNC system
- Elevator lighting
- Milling machines
- Textile machinery
- Shearing machines
- Driver circuits
- Refrigerators of central air conditioners
