ISL6445IAZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 24 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 6A |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 12V |
| Temperature Grade | INDUSTRIAL |
| Voltage | 24V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Current - Output | 6A |
| Quiescent Current | 50μA |
| Frequency (Max) | 1.55MHz |
| Max Output Voltage | 24V |
| Voltage - Output | 24V |
| Min Input Voltage | 5.6V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 800mV |
| Switcher Configuration | PHASE-SHIFT |
| Switching Frequency-Max | 1550kHz |
| Duty Cycle (Max) | 73 % |
| Height | 1.5mm |
| Length | 8.74mm |
| Width | 3.98mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL6445IAZ Overview
It comes in the QSOP package, which makes switching controller suitable for most applications. For outputs of 2, this dc motor controller is suitable. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 24 of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. There are a total of 24 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. To operate the voltage regulator dc to dc safely and reliably, users should apply 24V. Keep dc regulator at a temperature of -40°C or above. DC regulator should run at a temperature of 85°C more than 85°C degrees Celsius. Overall, the switch converters contains 1 function(s). DC switchings that are dormant use 50μA. We design voltage regulators switchings with 24 pins. It is possible for the controller to switch at a frequency of 1.55MHz. The maximum input voltage of the dc switcher is 24V, so users need to limit the voltage accordingly. A 6A input switching controller would benefit from it. Normally, it outputs a value of 24V. A voltage of 5.6V is required for the supply. An output current greater than 6A cannot be provided by the dc switcher. As per its datasheet, the switching converter has a maximum output of 24V volts. There is 800mV voltage output lower than 800mV on the voltage controller. This controller can operate at a frequency up to 1550kHz.
ISL6445IAZ Features
PULSE WIDTH MODULATION
ISL6445IAZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL6445IAZ DC to DC converter applications.
- PSRR circuits
- Milling machines
- Low output voltage switching power supply circuits
- Medical equipment
- Alternators
- Smoke prevention equipment
- Window air conditioners
- Thermal power
- Surge protection circuits
- Emergency lighting monitoring equipment
