ISL6526ACB
| Parameters | |
|---|---|
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.97V~3.63V |
| Control Features | Enable, Phase Control |
| Input Voltage (Min) | 3.3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | ISL6526A |
| Function | Step-Down |
ISL6526ACB Overview
With a 14-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC is packaged in a solid enclosure of Tube. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 2.97V~3.63V. Suitable for working in an dc switcher that has a 0°C~70°C TA. With this switching controller, you can switch at 300kHz. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Enable, Phase Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. 14 terminations with a variety of function. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A search for "ISL6526A" will reveal other relevant dc to dc converter ics. It is recommended that the input voltage of the dc dc voltage regulator be 3.3V. The dc to dc regulator can only accept a maximum input voltage of 5V.
ISL6526ACB Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Phase Control
PULSE WIDTH MODULATION
ISL6526ACB Applications
There are a lot of Renesas Electronics America Inc. ISL6526ACB DC to DC converter applications.
- Low output voltage switching power supply circuits
- Printing equipment
- Correction machines
- Driver circuits
- Automatic testing equipment
- Geothermal power
- Automatic plug-in machines
- Gear/thread machining machines
- Printing
- Servo drive system
