ISL6526AIRZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | VQFN |
| Number of Pins | 16 |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Input Voltage-Nom | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 2A |
| Frequency (Max) | 650kHz |
| Voltage - Output | 5V |
| Input Voltage (Min) | 2.97V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 650kHz |
| Input Voltage (Max) | 3.63V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 100 % |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL6526AIRZ-T Overview
This switching controller fits most application requirements since it is packaged in a VQFN package. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) solid enclosure protects the pmic. With this switching controller, you can switch at 650kHz. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at QUAD. A variety of terminations with 16 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 3.3V. There are a total of 16 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 2.97V. Voltages 3.63V are the maximum that the dc to dc regulator will accept. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sTo operate the voltage regulator dc to dc safely and reliably, users should apply 3.3V. Ideally, dc regulator should be kept at a temperature of -40°C or higher. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. A total of 1 functions are present in the switch converters. It is planned to design voltage regulators switchings with 16 pins. There is a maximum frequency of 650kHz that can be switched by the controller. A 2A input is ideal for this application. normalworking processes output 5V voltage.
ISL6526AIRZ-T Features
Switching Frequency: 650kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
ISL6526AIRZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL6526AIRZ-T DC to DC converter applications.
- Radio equipment
- Die casting equipment
- Post equipment
- PSRR circuits
- Digital video recorders
- Ball screw pair
- Wide-range voltage regulation circuits
- Cutting machine tools
- Low output voltage switching power supply circuits
- Alternators
