ISL6526CR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Terminal Pitch | 0.8mm |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.97V~3.63V |
| Control Features | Enable, Phase Control |
| Input Voltage (Min) | 2.97V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 3.63V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
ISL6526CR Overview
Capsuled in the 16-VQFN Exposed Pad package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tube is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 2.97V~3.63V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a 0°C~70°C TA dc switcher. This switching controller can switch at 300kHz. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Enable, Phase Control for efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Switching converters are designed with the terminal (s) at position QUAD . 16 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 3.3V is input. 2.97V should be the minimum input voltage for the dc dc voltage regulator. Voltages 3.63V are the maximum that the dc to dc regulator will accept. 2A is the greatest value switching converter outputs as current.
ISL6526CR Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Phase Control
PULSE WIDTH MODULATION
ISL6526CR Applications
There are a lot of Rochester Electronics, LLC ISL6526CR DC to DC converter applications.
- Computed tomography (CT)
- Scientific research
- Wind power
- Electric water heaters
- Textile machinery
- Sink circuits
- Hydraulic presses
- Surface processing equipment
- Boring machines
- USB circuits
