ISL6527CR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Terminal Pitch | 0.8mm |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.97V~3.63V |
| Control Features | Enable, Phase Control |
| Input Voltage (Min) | 2.97V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 3.63V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
ISL6527CR Overview
It comes in a 16-VQFN Exposed Pad package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tube solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 2.97V~3.63V. Suitable for a 0°C~70°C TA dc switcher. The switching controller can be switched at 300kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Enable, Phase Control provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the QUAD position. The 16 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis set to 3.3V. An input voltage of 2.97V is the minimum required for the dc dc voltage regulator. A maximum voltage of 3.63V is accepted by the dc to dc regulator as an input voltage.
ISL6527CR Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Phase Control
PULSE WIDTH MODULATION
ISL6527CR Applications
There are a lot of Rochester Electronics, LLC ISL6527CR DC to DC converter applications.
- Balance equipment
- Driver circuits
- SMT equipment
- Planers
- Constant current circuits
- Medical monitoring systems
- ATMs
- Linear guide
- Imported equipment
- Access control systems
