ISL6551IB
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 28 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 28 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Input Voltage-Nom | 12V |
| Temperature Grade | OTHER |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Quiescent Current | 13mA |
| Frequency (Max) | 1MHz |
| Voltage - Output | 16V |
| Input Voltage (Min) | 10.8V |
| Topology | Flyback, Push-Pull |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Input Voltage (Max) | 13.2V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 9.2ns |
| Fall Time (Typ) | 6.4 ns |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 50 % |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ISL6551IB Overview
Capsuled in the SOIC package, the switching controller suits most application needs. dc motor controller is suitable for 6 output generation. There is a switch at 1MHz that can be used with this controller. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 28. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Switching converter has a total of 28 pins. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 10.8V. A maximum voltage of 13.2V is accepted by the dc to dc regulator as an input voltage. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. A frequency of 1MHz is set for the switching controller. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 12V. At least 0°C°C is recommended. DC regulator should run at a temperature 85°C higher than 85°C. Total number of functions (s) for thare switch converters are 1. In dormant mode, 13mA is used. Designing voltage regulators switchings with 28 pins is one of the most important aspects of the process. Maximum frequency of the controller is 1MHz. This process outputs a value of 16V for normalworking processes.
ISL6551IB Features
Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
ISL6551IB Applications
There are a lot of Intersil (Renesas Electronics America) ISL6551IB DC to DC converter applications.
- Telecommunications equipment
- Arc suppression circuits
- Computer-related products
- Game consoles
- Radio equipment
- Automatic plug-in machines
- Hydraulic presses
- Industrial robots
- Bending machines
- Network technology
