ISL6558CR
| Parameters | |
|---|---|
| Package / Case | VQFN |
| Surface Mount | YES |
| Number of Pins | 20 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 5V |
| Temperature Grade | COMMERCIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Quiescent Current | 50μA |
| Frequency (Max) | 1.5MHz |
| Input Voltage (Min) | 4.75V |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 5.25V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 75 % |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ISL6558CR Overview
It comes in a VQFN package, so switching controller can be used for most applications. 1 outputs can be generated with the dc motor controller. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. QUAD are the position of the terminal of the switching converters. 20 terminations with various dc switching's functions. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. A DC switcher's nominal voltage of 5V is input. 20 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator should be 4.75V. Voltages 5.25V are the maximum that the dc to dc regulator will accept. The value of DC to DC voltage regulator is set to ALSO OPERATES IN CURRENT MODE in order to better satisfy the requirement. You should keep dc regulator at 0°C degrees or higher. A temperature of 70°C degrees Celsius is recommended. A total of 1 functions are present in the switch converters. DC switchings that are dormant use 50μA. A voltage regulators switching with 20 pins is designed. The controller can switch at the maximum frequency of 1.5MHz.
ISL6558CR Features
PULSE WIDTH MODULATION
ALSO OPERATES IN CURRENT MODE
ISL6558CR Applications
There are a lot of Intersil (Renesas Electronics America) ISL6558CR DC to DC converter applications.
- Drilling machines
- Hydrogen power
- Shearing machines
- Emergency lighting monitoring equipment
- Computer application technology
- Correction machines
- Large fire protection systems
- Hydraulic presses
- ATMs
- Lathes
