ISL6565ACR
| Parameters | |
|---|---|
| Package / Case | QFN |
| Surface Mount | YES |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | 0°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 28 |
| JESD-30 Code | S-PQCC-N28 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 5V |
| Temperature Grade | OTHER |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Frequency (Max) | 1.5MHz |
| Input Voltage (Min) | 4.75V |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 0.0005A |
| Input Voltage (Max) | 5.25V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 66.7 % |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL6565ACR Overview
As a result of QFN compact design, the switching controller is compatible with most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at QUAD. There are many different types of terminations for 28. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. Specially, switching converter corresponds to type Switching Regulator or Controllers. An input voltage of 4.75V is the minimum required for the dc dc voltage regulator. At most, the dc to dc regulator accepts 5.25V input voltage. Switching converter outputs current to the greatest value of 0.0005A. Keep dc regulator at a temperature of 0°C or above. The temperature should not exceed 105°C degrees Celsius. In total, the switch converters have 1 function (s). The dc switching comes with 28 pins set. The controller can switch at the maximum frequency of 1.5MHz.
ISL6565ACR Features
PULSE WIDTH MODULATION
ISL6565ACR Applications
There are a lot of Intersil (Renesas Electronics America) ISL6565ACR DC to DC converter applications.
- Printing
- Electrical power transmission
- Elevator lighting
- Computer monitoring equipment of building
- Handheld GPS
- Smoke prevention equipment
- Remotely powered electric motors
- SMT equipment
- Precision electronic equipment
- Solar power plants
