ISL6594DCRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | DFN |
| Number of Pins | 10 |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | MOSFET Drivers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Max Output Current | 3A |
| Temperature Grade | OTHER |
| Max Supply Voltage | 13.2V |
| Min Supply Voltage | 6.8V |
| Power Dissipation-Max | 1.5W |
| Operating Supply Current | 5mA |
| Current - Output | 3A |
| Rise Time | 26ns |
| Fall Time (Typ) | 18 ns |
| Interface IC Type | HALF BRIDGE BASED MOSFET DRIVER |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| High Side Driver | YES |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
ISL6594DCRZ Overview
Gate drivers provides greater flexibilGate driversy to use the DFN package.The configuration is supported by 2 drivers.Its configuration is based on a total of 10 terminations.The mount method is Surface Mount.In the device, there are 10 pins.In order to operate, a voltage of 12V has to be applied.The interface IC is referred to as HALF BRIDGE BASED MOSFET DRIVER.There is an output current limit of 3A for this device.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board contains 10 pins for component connections.85°C is the maximum acceptable operating temperature.Temperatures below 0°C are allowable as a minimum.The maximum voltage for operation is 13.2V.This device operates at 6.8V as the minimum supply voltage.As a result, it outputs a 3A current.The supply voltage is 5mA.
ISL6594DCRZ Features
2 drivers
10 pins
ISL6594DCRZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL6594DCRZ gate drivers applications.
- DC/DC converters
- Industrial Motor Inverter - Power Tools, Robotics
- RGB applications
- Motor Drives
- Power factor correction (PFC) circuits
- A/D drivers
- Motor controllers
- Motor Control
- Smart Phones
- UPS systems
