ISL8103IRZ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 40 |
| Terminal Finish | MATTE TIN |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-PQCC-N40 |
| Function | Step-Down |
| Number of Outputs | 3 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.75V~12.6V |
| Control Features | Enable, Frequency Control, Phase Control, Power Good |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1.5MHz |
| Input Voltage (Max) | 5.25V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 66.6% |
| Clock Sync | No |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
ISL8103IRZ Overview
In the 40-VFQFN Exposed Pad package, the switching controller meets most application requirements. It is sufficient to generate 3 outputs with this dc motor controller. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. A 4.75V~12.6V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~85°C TA rating. With this switching controller, you can switch at Up to 1.5MHz. The Surface Mount value makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Phase Control, Power Good. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position QUAD . Various 40 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.75V. The dc to dc regulator can only accept a maximum input voltage of 5.25V.
ISL8103IRZ Features
Transistor Driver Outputs
Switching Frequency: Up to 1.5MHz
Enable, Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
ISL8103IRZ Applications
There are a lot of Rochester Electronics, LLC ISL8103IRZ DC to DC converter applications.
- Domestic water pumps
- Plate bending machines
- ATMs
- Wide-range voltage regulation circuits
- Power supplies of electronic gadgets
- Smart grid
- Gear/thread machining machines
- Telecommunications equipment
- Digital video recorders
- Laboratories
