ISL8118IRZ
| Parameters | |
|---|---|
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | ISL8118 |
| JESD-30 Code | S-PQCC-N28 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.9V~5.6V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 2.9V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 250kHz~2MHz |
| Input Voltage (Max) | 5.6V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Duty Cycle (Max) | 100% |
| Clock Sync | No |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 28-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT HAS INPUT VOLTAGE FRM 3 TO 20V |
ISL8118IRZ Overview
It comes in a 28-VFQFN Exposed Pad package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 1. An enclosure of Tube is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 2.9V~5.6V. A -40°C~85°C TA dc switcher is not a problem. Switching can be done at 250kHz~2MHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at QUAD. A variety of 28 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 5V. ISL8118 can be searched for other relevant dc to dc converter ics. An input voltage of 2.9V is the minimum required for the dc dc voltage regulator. This dc to dc regulator accepts only 5.6V input voltage at most. The value of DC to DC voltage regulator is set at IT HAS INPUT VOLTAGE FRM 3 TO 20V in order to fulfill the requirements more effectively.
ISL8118IRZ Features
Transistor Driver Outputs
Switching Frequency: 250kHz~2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
IT HAS INPUT VOLTAGE FRM 3 TO 20V
ISL8118IRZ Applications
There are a lot of Renesas Electronics America Inc. ISL8118IRZ DC to DC converter applications.
- Drilling machines
- Lathes
- Plate bending machines
- Driver circuits
- Gear/thread machining machines
- Experimental setup
- Program control systems
- Elevator lighting
- Adjustable voltage or current linear circuits
- Hydraulic presses
