ISL8325IBZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 60Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| Power Supplies | 3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 1μA |
| Max Supply Current | 1μA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Turn On Delay Time | 150 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 100 ns |
| Off-state Isolation-Nom | 72 dB |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL8325IBZ Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOIC. High reliability is achieved by using advanced packaging method Bulk. Total terminations are 8. A electrical component with 1 channels is capable of high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An electrical component like this is included in the 8 series. In this multiplexer, the internal resistance is 60Ohm. To find out what the 8 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Digital switch that provides Single power at a cost-effective price. A low voltage of 2.7V should be applied to the electronic component. An operating current of 1μA would be sufficient for this switch device. Put voltage above 1μA on the multiplexer to cause damage. During operation, the multiplexer should not be exposed to a temperature above 85°C. It can conduct 2-bit signals.
ISL8325IBZ Features
1 Channels
1μA Supply Current
2-Bit
ISL8325IBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL8325IBZ Analog Switches & Multiplexers ICs applications.
- Data switching
- Medical
- Medical Instrumentation
- Digital cross connects (DSX-1)
- Transmit
- SDH/SONET multiplexers
- Precision instrumentation
- Audio and video routing
- Automatic test equipment
- High reliability control systems
