ISL8391IBZ
| Parameters | |
|---|---|
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 10nA |
| Max Supply Current | 1μA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Turn On Delay Time | 130 ns |
| Supply Type | Dual, Single |
| Bandwidth | 300MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 75 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 2V |
| Dual Supply Voltage | 5V |
| Off-state Isolation-Nom | 71 dB |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| Resistance | 35Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
ISL8391IBZ Overview
This electronic part is conveniently packaged in SOIC, making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Bulk is used. Total terminations are 16. As a result of its 1 channels, this electronic component provides high-quality output. If the voltage supply is 5V volts, the electrical component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. This digital multiplexer has 35Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 12V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 2V should be the lowest voltage fed to the electronic component. It would be sufficient to run this analogue multiplexer with 10nA current. When the digital multiplexer is charged above 1μA, damage can occur. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. A dual power supply should have at least 2V voltage attached. There are SEPARATE OUTPUT outputs on this analog switch ic. This switch operates within the bandwidth of 300MHz. An environment with a temperature greater than 85°C should not be used to operate the digital switches. Its conductivity is 4-bit.
ISL8391IBZ Features
1 Channels
10nA Supply Current
Bandwidth: 300MHz
4-Bit
ISL8391IBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL8391IBZ Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Microwave transmission systems
- Transmit
- Communication systems
- Imaging
- PBXs
- RGB switches
- Signal routing between systems
- Relay replacements
