ISL8392IB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 35Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 1 |
| Operating Supply Current | 10nA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Off-state Isolation-Nom | 71 dB |
| Neg Supply Voltage-Max (Vsup) | -6V |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 130ns |
| Switch-off Time-Max | 75ns |
| Normal Position | NO |
| Neg Supply Voltage-Min (Vsup) | -2V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL8392IB Overview
Shipping overseas is convenient with the electronic component packed in SOIC. In order to provide high reliability, an advanced packaging method Bulk is used. In total, there are 16 terminations. A electrical component with 1 channels is capable of high-quality output. A 5V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the body of the electronic part. An switch multiplexer with 35Ohm internal resistance has a value of 35Ohm. This switch device is a typical Multiplexer or Switches. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 10nA current would be enough for this multiplexer to operate. There are SEPARATE OUTPUT outputs on this analog switch ic. Temperatures higher than 85°C are not recommended for operation of the analogue multiplexer. It conducts in a 4-bit manner. To power the multiplexer ics, the voltage must be set at 2V.
ISL8392IB Features
1 Channels
10nA Supply Current
4-Bit
ISL8392IB Applications
There are a lot of Intersil (Renesas Electronics America) ISL8392IB Analog Switches & Multiplexers ICs applications.
- Communication systems
- Multiplexers
- PBXs
- High speed data transmission line cards
- Fiber In The Loop (FITL)
- Audio/video switches
- DSLAMs
- Medical Instrumentation
- Battery Powered Instruments
- Cross Connects
