ISL8394IBZ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 2V~12V ±2V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| On-State Resistance (Max) | 35Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 71 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 130ns, 75ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -92dB @ 1MHz |
| Switch-on Time-Max | 130ns |
| Switch-off Time-Max | 75ns |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
ISL8394IBZ Overview
Presented in 20-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. 20 terminations have been made so far. A high-quality output is provided by the electrical component's 1 channels. An 5V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 20 series of products. A SPDT switching circuit is used for these analog switches. There are 4 circuits in this switch device.
ISL8394IBZ Features
1 Channels
Switch Circuit: SPDT
ISL8394IBZ Applications
There are a lot of Rochester Electronics, LLC ISL8394IBZ Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Fault Tolerant Systems
- Avionics test equipment
- Power routing
- CSU
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Multi-Line E1 Interface Cards
- Data Acquisition Systems
- Precision test equipment
- Communication systems
