ISL84051IBZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| Resistance | 225Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | VIDEO APPLICATION |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/5/+-5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 1μA |
| Throw Configuration | DPST |
| Propagation Delay | 75 ns |
| Turn On Delay Time | 180 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 2V |
| High Level Output Current | 30mA |
| Low Level Output Current | 30mA |
| Off-state Isolation-Nom | 90 dB |
| On-state Resistance Match-Nom | 6Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 50ns |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL84051IBZ Overview
Due to its SOIC packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Bulk. In total, 16 terminations have occurred. The electronic part delivers high-quality output through its 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. It has an internal resistance of 225Ohm. Datasheets for 16 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 12V in normal situations. An effective Dual, Single supply digital multiplexer. 2V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 1μA current. Despite this switch's dual supply capability, its voltage should not exceed 6V. You should attach at least 2V voltage if you are using dual power supply. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. Operating voltages of 9V are compatible with the electrical part. There is also VIDEO APPLICATION to look out for in this electronic part. Temperatures above 85°C should not be used to operate the switches.
ISL84051IBZ Features
1 Channels
1μA Supply Current
Additional Features: VIDEO APPLICATION
ISL84051IBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84051IBZ Analog Switches & Multiplexers ICs applications.
- CSU
- Routers
- Automatic test equipment
- Sample-and-hold systems
- SDH
- Video signal routing
- HDTV
- DSLAMs
- Relay replacements
- Cross Connects
