ISL84052IAZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| Resistance | 225Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | VIDEO APPLICATION |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/5/+-5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 100nA |
| Max Supply Current | 1μA |
| Throw Configuration | 4PST |
| Propagation Delay | 75 ns |
| Turn On Delay Time | 180 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 2V |
| High Level Output Current | 30mA |
| Low Level Output Current | 30mA |
| Off-state Isolation-Nom | 90 dB |
| On-state Resistance Match-Nom | 6Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 50ns |
| Height Seated (Max) | 1.73mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL84052IAZ Overview
The electronic component is convenient to ship overseas because it is packed in a SSOP. This high-reliability packaging method uses advanced packaging methods Bulk. Total terminations are 16. A high-quality output is provided by the electrical component's 4 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. This multiplexer is composed of 2 circuits. In this multiplexer, the internal resistance is 225Ohm. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 12V in normal situations. The analog switch ic is of the Dual, Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2V. This multiplexer would work with 1μA current. Putting voltage greater than 1μA on the multiplexer may cause damage. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 2V. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. Operating voltages of 9V are compatible with the electrical part. Check out the electrical component's additional features, such as the following: VIDEO APPLICATION. Temperatures above 85°C should not be used to operate the switches.
ISL84052IAZ Features
4 Channels
1μA Supply Current
Additional Features: VIDEO APPLICATION
ISL84052IAZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84052IAZ Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Medical systems
- Cellular phones
- Central office
- Video signal routing
- HDTV
- DVD-R
- E1 Multiplexer
- Channel Banks
- MP3 players
