ISL84052IBZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| Resistance | 225Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | VIDEO APPLICATION |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Operating Supply Voltage | 9V |
| Power Supplies | 3/5/+-5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 100nA |
| Max Supply Current | 1μA |
| Throw Configuration | 4PST |
| Propagation Delay | 75 ns |
| Turn On Delay Time | 180 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 100 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 2V |
| Off-state Isolation-Nom | 90 dB |
| On-state Resistance Match-Nom | 6Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 50ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL84052IBZ Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOIC. The advanced packaging method Bulk provides high reliability. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 4 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. Circuits number 2 make up this analogue multiplexer. As far as internal resistance is concerned, it has 225Ohm. Please refer to the datasheets for 16 pins functions. It is a typical Multiplexer or Switches analog multiplexer. It is generally not recommended to supply a voltage higher than 12V to the switch device in normal circumstances. Dual, Single supply type digital switch with a low cost. There should be 2V voltage fed to the electrical part below 2V. This digital switch can be operated with a current of 1μA. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. There is no problem with using dual supply voltage, but it should not exceed 6V. In the case of dual power supplies, you should connect at least 2V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. It can operate from 9V operating voltages. You shouldn't miss the additional features of the electrical component, such as: VIDEO APPLICATION. Temperatures higher than 85°C are not recommended for operation of the analogue multiplexer.
ISL84052IBZ Features
4 Channels
1μA Supply Current
Additional Features: VIDEO APPLICATION
ISL84052IBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84052IBZ Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- Audio and video switching
- Battery-powered systems
- Wireless Local Loop
- Fault Tolerant Systems
- Audio/video switches
- Microwave transmission systems
- RGB switches
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Imaging
