ISL84467IRTZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 16 |
| Packaging | Tape & Reel |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| Resistance | 400mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Power Supplies | 1.8/4.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 150nA |
| Max Supply Current | 150nA |
| Throw Configuration | SPDT |
| Turn On Delay Time | 34 ns |
| Supply Type | Single |
| Bandwidth | 104MHz |
| Turn-Off Delay Time | 18 ns |
| Off-state Isolation-Nom | 65 dB |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ISL84467IRTZ-T Overview
A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel. In total, there have been 16 terminations. A high-quality output is provided by the electrical component's 1 channels. When the electronic component is given a voltage of 1.8V, it should be turned on and run. Internally, this switch multiplexer has a resistance of 400mOhm. Datasheets for functions of 16 pins are available. Theswitch device is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 4.5V. Digital switch that provides Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 1.65V. The switch device would be able to operate with 150nA current. A voltage higher than 150nA may cause damage to the switch multiplexer. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. 104MHz-bandwidths can be used to transfer data between multiplexers. Temperatures over 85°C should not be allowed for the multiplexer to operate.
ISL84467IRTZ-T Features
1 Channels
150nA Supply Current
Bandwidth: 104MHz
ISL84467IRTZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL84467IRTZ-T Analog Switches & Multiplexers ICs applications.
- Avionics
- T1/E1 Terminals
- Industrial control systems
- FTTH
- Video switching
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Microprocessor controlled systems
- Optical Applications
- Digital access cross connects
- Frame Relay Equipment
