ISL84521IBZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16, 16 |
| JESD-30 Code | R-PDSO-G16 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 50nA |
| Max Supply Current | 1μA |
| Number of Bits | 4 |
| Throw Configuration | SPST |
| Turn On Delay Time | 80 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 30 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 2V |
| Dual Supply Voltage | 5V |
| On-state Resistance Match-Nom | 1Ohm |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL84521IBZ Overview
The electronic component is convenient to ship overseas because it is packed in a SOIC. This high-reliability packaging method uses advanced packaging methods Bulk. A total of 16 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. This electronic part can be found in the 16, 16 series. Analog switches have 100Ohm internal resistance. Users shouldn't supply more than 12V voltage to the switch device. The digital multiplexer has a low cost Dual, Single supply. In order for the electronic part to function properly, the lowest voltage should be 2V. In order to operate this switch device, it would need a current of 50nA. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. If you are using a dual power supply, you should attach at least 2V. Temperatures over 85°C should not be allowed for the multiplexer to operate. 4-bits are supported.
ISL84521IBZ Features
1 Channels
50nA Supply Current
4-Bit
ISL84521IBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84521IBZ Analog Switches & Multiplexers ICs applications.
- Video switching
- Medical systems
- Transmit
- Central office
- Microprocessor Controlled Analog Systems
- USB 1.1 signal switching circuits
- Multiplexers
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Channelized and Unchannelized DS3 applications
- RGB switches
