ISL84525IU
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | MSOP |
| Number of Pins | 10 |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 150Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 12V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Operating Supply Current | 1μA |
| Number of Bits | 3 |
| Throw Configuration | DPDT |
| Supply Type | Single |
| Off-state Isolation-Nom | 75 dB |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 200ns |
| Height Seated (Max) | 1.1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL84525IU Overview
The electronic component is convenient to ship overseas because it is packed in a MSOP. A high level of reliability can be achieved through the use of an advanced packaging method Bulk. There are 8 terminations totally. As a result of its 2 channels, this electronic component provides high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. A total of 8 pins are injected into the electrical part body. The internal resistance of this digital multiplexer is 150Ohm. For functions related to 10 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A analog switch ic that has a cost-effective Single supply type. 1μA current would be enough for this multiplexer to operate. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. It is not recommended to operate the switches in an environment with a temperature higher than 85°C. 3-bits are supported. Providing the analog switch ic with electricity requires a minimum voltage of 2V.
ISL84525IU Features
2 Channels
1μA Supply Current
3-Bit
ISL84525IU Applications
There are a lot of Intersil (Renesas Electronics America) ISL84525IU Analog Switches & Multiplexers ICs applications.
- Avionics
- PDH Multiplexers
- DSLAMs
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Audio/video switches
- Cross Connects
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Microprocessor controlled systems
- Relay replacements
- PDAs
