ISL84525IUZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISL84525 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 150Ohm |
| Multiplexer/Demultiplexer Circuit | 2:2 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 14pF |
| Switch Circuit | DPDT |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | 0.8pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switch-on Time-Max | 400ns |
| Switch-off Time-Max | 300ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
ISL84525IUZ-T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 2:2. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 10 terminations. A electrical component with 2 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. The electrical component body receives 10 pins. Multiplexers built on a DPDT switching circuit are built. The multiplexer consists of 2 circuits. Try searching with ISL84525 to find analog multiplexer variants. A voltage of 2V~12V is required to drain this analog switch from a single voltage supply.
ISL84525IUZ-T Features
2 Channels
Switch Circuit: DPDT
ISL84525IUZ-T Applications
There are a lot of Renesas Electronics America Inc. ISL84525IUZ-T Analog Switches & Multiplexers ICs applications.
- DSUs
- Cellular phones
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Sample-and-hold systems
- Remote Powered Equipment
- SDH
- Industrial control systems
- Digital Cross-Connects
- PDH Multiplexers
- Medical
