ISL84541CB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 60Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Output | SEPARATE OUTPUT |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Operating Supply Current | 100pA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Supply Type | Single |
| Off-state Isolation-Nom | 76 dB |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 50ns |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL84541CB Overview
This electronic part is conveniently packaged in SOIC, making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Bulk. In total, 8 terminations have occurred. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 3.3V voltage supply. 8 pins are injected to the electronic part body. Internally, this switch multiplexer has a resistance of 60Ohm. The analogue multiplexer in this example is a typical Multiplexer or Switches. The analog switch ic is of the Single supply type and is cost-effective. This digital switch can be operated with a current of 100pA. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The switches should not operate in an environment where the temperature is higher than 70°C. Its conductivity is 2-bit.
ISL84541CB Features
1 Channels
100pA Supply Current
2-Bit
ISL84541CB Applications
There are a lot of Intersil (Renesas Electronics America) ISL84541CB Analog Switches & Multiplexers ICs applications.
- Battery-powered systems
- Isolation
- Audio and video switching
- PBX interfaces
- SONET/SDH ADM
- Precision test equipment
- Avionics and Military Systems
- Cable Modem
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Video switching
