ISL84541CBZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 60Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Power Supplies | 3.3/5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 100pA |
| Max Supply Current | 1μA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Turn On Delay Time | 100 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 75 ns |
| Off-state Isolation-Nom | 76 dB |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 50ns |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL84541CBZ Overview
The electrical component comes in SOIC packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Bulk. The total number of terminations is 8. A high-quality output is provided by the electrical component's 1 channels. An 3.3V voltage supply should allow the electrical part to be turned on and run. A 60Ohm internal resistance characterizes this multiplexer. Datasheets for functions of 8 pins are available. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 12V in normal situations. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 2.7V. This digital switch can be operated with a current of 100pA. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. In an environment with a temperature higher than 70°C, the digital switches should not operate. It is able to conduct in a 2-bit way.
ISL84541CBZ Features
1 Channels
100pA Supply Current
2-Bit
ISL84541CBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84541CBZ Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- Audio and video routing
- Low-Voltage
- Multi-Line E1 Interface Cards
- Video switching
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Relay Replacement
- Microwave transmission systems
- Microprocessor Controlled Analog Systems
- 65 V DACs
