banner_page

ISL84541CP

100ns, 75ns SPST - NO 60Ohm DUAL Analog Switches 8 Pins 100pA 3.3V 8-DIP (0.300, 7.62mm)


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-ISL84541CP
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 298
  • Description: 100ns, 75ns SPST - NO 60Ohm DUAL Analog Switches 8 Pins 100pA 3.3V 8-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Operating Temperature 0°C~70°C TA
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
Terminal Finish TIN LEAD
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 2
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 8
JESD-30 Code R-PDIP-T8
Number of Channels 1
Number of Circuits 2
On-State Resistance (Max) 60Ohm
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 76 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 8pF 8pF
On-state Resistance Match-Nom 0.8Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 100ns, 75ns
Charge Injection 1pC
Channel-to-Channel Matching (ΔRon) 800m Ω
Crosstalk -90dB @ 1MHz
Switch-off Time-Max 50ns
Voltage - Supply, Single (V+) 2.7V~12V
Height Seated (Max) 5.33mm
Length 9.585mm
RoHS Status Non-RoHS Compliant

ISL84541CP Overview


Shipping overseas is convenient with the electronic component packed in 8-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to 0°C~70°C TA. 8 terminations have been made so far. A electrical component with 1 channels is capable of high-quality output. When a voltage supply of 3.3V is used, the electronic component should be turned on and run. Into the electrical component body are injected 8 pins. Based on SPST - NO switching circuits, these analog multiplexers work. There are 2 circuits in this multiplexer. This analogue multiplexer requires a voltage of 2.7V~12V when it drains from a single voltage supply.

ISL84541CP Features


1 Channels
Switch Circuit: SPST - NO

ISL84541CP Applications


There are a lot of Rochester Electronics, LLC ISL84541CP Analog Switches & Multiplexers ICs applications.

  • Low-Voltage
  • SONET/SDH ADM
  • Video switching
  • Battery Powered Instruments
  • DSLAMs
  • PBXs
  • Power routing
  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • Fiber to the Home
  • Fiber In The Loop (FITL)

Write a review

Note: HTML is not translated!
    Bad           Good