ISL84541IUZ-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| Resistance | 60Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Output | SEPARATE OUTPUT |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 100pA |
| Max Supply Current | 1μA |
| Number of Bits | 2 |
| Throw Configuration | SPST |
| Turn On Delay Time | 100 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 75 ns |
| Off-state Isolation-Nom | 76 dB |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 50ns |
| Normal Position | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL84541IUZ-T Overview
This electronic part is conveniently packaged in MSOP, making it easy to ship abroad. There are 8 terminations totally. The electronic part provides high-quality output because it has 1 channels. In the case of a voltage supply of 3.3V volts, the electrical part can be powered up and run. The internal resistance of this digital multiplexer is 60Ohm. Please refer to the datasheets for 8 pins functions. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 12V voltage to the switch device. The digital multiplexer has a low cost Single supply. A low voltage of 2.7V should be applied to the electronic component. The switch device would be able to operate with 100pA current. A voltage higher than 1μA may cause damage to the switch multiplexer. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. In an environment with a temperature higher than 85°C, the digital switches should not operate. 2-bit conductivity is possible.
ISL84541IUZ-T Features
1 Channels
100pA Supply Current
2-Bit
ISL84541IUZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL84541IUZ-T Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Industrial and process control systems
- Communications systems
- Central office
- Sample hold systems
- Private Branch Exchange (PBX)
- Ultrasound
- Medical
- Sample-and-hold systems
- Audio and video routing
