banner_page

ISL84542CB

100ns, 75ns SPST - NC 60Ohm DUAL Analog Switches 8 Pins 100pA 3.3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-ISL84542CB
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 442
  • Description: 100ns, 75ns SPST - NC 60Ohm DUAL Analog Switches 8 Pins 100pA 3.3V 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Operating Temperature 0°C~70°C TA
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Terminal Finish TIN LEAD
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 2
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 8
JESD-30 Code R-PDSO-G8
Number of Channels 1
Number of Circuits 2
On-State Resistance (Max) 60Ohm
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 76 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 8pF 8pF
On-state Resistance Match-Nom 0.8Ohm
Switch Circuit SPST - NC
Switch Time (Ton, Toff) (Max) 100ns, 75ns
Charge Injection 1pC
Channel-to-Channel Matching (ΔRon) 800m Ω
Crosstalk -90dB @ 1MHz
Switch-off Time-Max 50ns
Voltage - Supply, Single (V+) 2.7V~12V
Height Seated (Max) 1.75mm
Length 4.9mm
Width 3.9mm
RoHS Status Non-RoHS Compliant

ISL84542CB Overview


The electronic part can be shipped overseas conveniently because it is packaged in 8-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Increasing operating temperature to around 0°C~70°C TA. Totally, there are 8 terminations. Due to its 1 channels, the electrical component produces high-quality output. If the voltage supply is 3.3V volts, the electrical component should be turned on and run. 8 pins are injected to the electronic part body. SPST - NC switching circuits are used in these analog switch ics. It consists of 2 circuits. Using a single voltage supply, this switch device consumes 2.7V~12V volts.

ISL84542CB Features


1 Channels
Switch Circuit: SPST - NC

ISL84542CB Applications


There are a lot of Rochester Electronics, LLC ISL84542CB Analog Switches & Multiplexers ICs applications.

  • Industrial
  • Precision data acquisition
  • Optical Applications
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Industrial control systems
  • Digital cross connects (DSX-1)
  • RGB switches
  • Audio and video switching
  • CSU
  • Communications systems

Write a review

Note: HTML is not translated!
    Bad           Good