ISL84542IP
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Height Seated (Max) | 5.33mm |
| Length | 9.585mm |
| RoHS Status | Non-RoHS Compliant |
ISL84542IP Overview
Presented in 8-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature around -40°C~85°C TA extended. In total, there have been 8 terminations. By its 1 channels, the electronic component provides high-quality output. In the case of a voltage supply of 3.3V volts, the electrical part can be powered up and run. The electrical component body receives 8 pins. Based on SPST - NC switching circuits, these analog multiplexers work. There are 2 circuits in this multiplexer. This analogue multiplexer requires a voltage of 2.7V~12V when it drains from a single voltage supply.
ISL84542IP Features
1 Channels
Switch Circuit: SPST - NC
ISL84542IP Applications
There are a lot of Rochester Electronics, LLC ISL84542IP Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Data Acquisition Systems
- Transmit
- PDAs
- Cross Connects
- Switching Systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- PDH Multiplexers
- Audio and video signal routing
- Fiber to the Home
