ISL84544CBZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 60Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Power Supplies | 3.3/5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 100pA |
| Max Supply Current | 1μA |
| Number of Bits | 2 |
| Throw Configuration | SPDT |
| Turn On Delay Time | 100 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 75 ns |
| Off-state Isolation-Nom | 76 dB |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 50ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL84544CBZ Overview
Packed in SOIC, the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Bulk. In total, there are 8 terminations. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 3.3V voltage supply. The internal resistance of this digital multiplexer is 60Ohm. Datasheets for functions of 8 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 12V in normal situations. Analog switch ics with Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 2.7V. For this multiplexer to operate, 100pA current would be sufficient. A digital multiplexer may suffer damage if voltage is applied above 1μA. Temperatures higher than 70°C are not recommended for operation of the analogue multiplexer. It can conduct 2-bit signals.
ISL84544CBZ Features
1 Channels
100pA Supply Current
2-Bit
ISL84544CBZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84544CBZ Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- Industrial
- FTTH
- Cable PC
- Automotive applications
- MP3 players
- Isolation
- Imaging
- Precision instrumentation
- SONET
