ISL84544CP
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Height Seated (Max) | 5.33mm |
| Length | 9.585mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
ISL84544CP Overview
As the electronic part is packed in 8-DIP (0.300, 7.62mm), international shipping is convenient. High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Around 0°C~70°C TA is the extended operating temperature. Total terminations are 8. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. The electrical component body receives 8 pins. Circuits based on SPDT switching are used to construct these analog switch ics. This multiplexer is composed of 1 circuits. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~12V.
ISL84544CP Features
1 Channels
Switch Circuit: SPDT
ISL84544CP Applications
There are a lot of Rochester Electronics, LLC ISL84544CP Analog Switches & Multiplexers ICs applications.
- Cable PC
- PCMCIA cards
- Automotive applications
- Frame Relay Equipment
- SONET/SDH ADM
- Transmit
- Communications systems
- HDTV
- Fiber to the Home
- Audio and video routing
