ISL84581IAZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| Resistance | 180Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Operating Supply Voltage | 9V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 7μA |
| Nominal Supply Current | 7μA |
| Max Supply Current | 7μA |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 100 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 50 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 2V |
| Off-state Isolation-Nom | 92 dB |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 40ns |
| Neg Supply Voltage-Min (Vsup) | -4.5V |
| Length | 4.89mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ISL84581IAZ Overview
Due to its SSOP packaging, the electronic part is convenient for international shipping. In total, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. A 5V voltage supply should turn on and run the electronic component. A 180Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. In a normalsituation, users should not supply the switches with voltage higher than 12V. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 2V. This digital switch can be operated with a current of 7μA. The analogue multiplexer may be damaged if voltage is greater than 7μA. There is no problem with using dual supply voltage, but it should not exceed 6V. With dual power supplies, you should attach at least 2V. There is a voltage range of 9V operating voltages for the electrical part. An environment with a temperature greater than 85°C should not be used to operate the digital switches.
ISL84581IAZ Features
1 Channels
7μA Supply Current
ISL84581IAZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84581IAZ Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Mechanical reed relay replacement
- Switching Systems
- Digital Cross-Connects
- Fiber In The Loop (FITL)
- Digital access cross connects
- Industrial and process control systems
- Private Branch Exchange (PBX)
- T1/E1 Terminals
