ISL84582IVZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 180Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 1μA |
| Max Supply Current | 1μA |
| Throw Configuration | 4PST |
| Propagation Delay | 50 ns |
| Turn On Delay Time | 100 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 50 ns |
| Max Dual Supply Voltage | 6V |
| Min Dual Supply Voltage | 2V |
| Off-state Isolation-Nom | 92 dB |
| On-state Resistance Match-Nom | 1.3Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 35ns |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL84582IVZ Overview
The electronic component is convenient to ship overseas because it is packed in a TSSOP. Totally, there are 16 terminations. The electronic part delivers high-quality output through its 2 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Internally, this switch multiplexer has a resistance of 180Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 12V. An effective Dual, Single supply digital multiplexer. There should be 2V voltage fed to the electrical part below 2V. It would be sufficient to run this analogue multiplexer with 1μA current. The analogue multiplexer may be damaged if voltage is greater than 1μA. Despite this switch's dual supply capability, its voltage should not exceed 6V. In the case of dual power supplies, you should connect at least 2V. Integrated with DIFFERENTIAL MULTIPLEXER analog IC. The electronic component can function from 5V. A temperature above 85°C is not suitable for operation of the analogue multiplexer.
ISL84582IVZ Features
2 Channels
1μA Supply Current
ISL84582IVZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84582IVZ Analog Switches & Multiplexers ICs applications.
- Avionics
- Video signal routing
- Automotive applications
- CSU
- New designs requiring multiplexer functions
- Audio/video switches
- PDAs
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Cable Modem
- ISDN NT1/TA
