ISL84684IRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | DFN |
| Number of Pins | 10 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 10 |
| Resistance | 500mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Power Supplies | 1.8/3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40nA |
| Max Supply Current | 40nA |
| Number of Bits | 2 |
| Throw Configuration | SPDT |
| Turn On Delay Time | 50 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 27 ns |
| Off-state Isolation-Nom | 68 dB |
| On-state Resistance Match-Nom | 0.03Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL84684IRZ Overview
The electronic part can be shipped overseas conveniently because it is packaged in DFN. In total, there have been 10 terminations. The electronic part delivers high-quality output through its 2 channels. A 3V voltage supply should turn on and run the electronic component. In this multiplexer, the internal resistance is 500mOhm. To find out what the 10 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 3.6V. Digital switch that provides Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 1.65V. For this digital switch to work, 40nA current would suffice. It may damage the digital multiplexer if the voltage is higher than 40nA. A temperature above 85°C is not suitable for operation of the analogue multiplexer. It can conduct in a 2-bit manner.
ISL84684IRZ Features
2 Channels
40nA Supply Current
2-Bit
ISL84684IRZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84684IRZ Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Mechanical reed relay replacement
- PDAs
- Relay replacements
- Optical Applications
- Data Acquisition Systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Digital cross connects (DSX-1)
- Video switching
- PBXs
