ISL84684IU-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | MSOP |
| Number of Pins | 10 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 10 |
| Resistance | 500mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3.3V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.65V |
| Number of Channels | 2 |
| Operating Supply Current | 40nA |
| Number of Bits | 2 |
| Throw Configuration | SPDT |
| Supply Type | Single |
| Off-state Isolation-Nom | 68 dB |
| On-state Resistance Match-Nom | 0.03Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ISL84684IU-T Overview
The electrical component comes in MSOP packaging, which makes it convenient to ship overseas. A total of 10 terminations have been recorded. The electronic part delivers high-quality output through its 2 channels. With a 3V voltage supply, the electrical component should be turned on and run. A key feature of the 10 series is the inclusion of this electronic part as part of its design. Internally, this switch multiplexer has a resistance of 500mOhm. To find out what the functions of 10 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Analogue multiplexer with a Single supply type that is cost-effective. This multiplexer would work with 40nA current. Temperatures over 85°C should not be allowed for the multiplexer to operate. It is able to conduct in a 2-bit way. This analog switch ic needs a voltage of 1.65V as its minimum supply voltage.
ISL84684IU-T Features
2 Channels
40nA Supply Current
2-Bit
ISL84684IU-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL84684IU-T Analog Switches & Multiplexers ICs applications.
- ATM
- DVD-R
- Audio signal routing
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- USB 1.1 signal switching circuits
- RGB switches
- Digital Cross-Connects
- CSU
- Precision test equipment
- Remote wireless modules
