ISL84684IUZ
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Power Supplies | 1.8/3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40nA |
| Max Supply Current | 750nA |
| Number of Bits | 2 |
| Throw Configuration | SPDT |
| Turn On Delay Time | 60 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 35 ns |
| Off-state Isolation-Nom | 68 dB |
| On-state Resistance Match-Nom | 0.03Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | MSOP |
| Number of Pins | 10 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 10 |
| Resistance | 500mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
ISL84684IUZ Overview
Shipping overseas is convenient with the electronic component packed in MSOP. In total, there have been 10 terminations. Due to its 2 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. In this multiplexer, the internal resistance is 500mOhm. To find out what the 10 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 1.65V. In order to operate this switch device, it would need a current of 40nA. The analogue multiplexer may be damaged if voltage is greater than 750nA. The switches should not operate in an environment where the temperature is higher than 85°C. 2-bits are supported.
ISL84684IUZ Features
2 Channels
40nA Supply Current
2-Bit
ISL84684IUZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84684IUZ Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Isolation
- Cellular phones
- Automatic test equipment
- Channelized and Unchannelized DS3 applications
- Relay Replacement
- Digital cross connects (DSX-1)
- Audio signal routing
- Medical
