ISL84714IHZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Number of Pins | 6 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 600mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 706 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 18nA |
| Max Supply Current | 50nA |
| Number of Bits | 1 |
| Throw Configuration | SPDT |
| Turn On Delay Time | 11 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 7 ns |
| High Level Output Current | 150mA |
| Low Level Output Current | 150mA |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 9ns |
| Length | 2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL84714IHZ-T Overview
6 terminations have been made so far. A electrical component with 1 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. The electronic part body is injected with 706 pins. This digital multiplexer has 600mOhm internal resistance. To find out what the 6 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. It is recommended that the electrical component receives a voltage of 1.65V. For this multiplexer to operate, 18nA current would be sufficient. A digital multiplexer may suffer damage if voltage is applied above 50nA. It is not recommended to operate the switches in an environment with a temperature higher than 85°C. It conducts in a 1-bit manner.
ISL84714IHZ-T Features
1 Channels
18nA Supply Current
1-Bit
ISL84714IHZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL84714IHZ-T Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- Sample hold systems
- Private Branch Exchange (PBX)
- DSUs
- Fault Tolerant Systems
- Medical
- ISDN NT1/TA
- E1 Network Equipment
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Optical Applications
