ISL84762IRZ
| Parameters | |
|---|---|
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Number of Pins | 10 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 10 |
| Resistance | 600mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Power Supplies | 1.8/3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40nA |
| Max Supply Current | 40nA |
| Number of Bits | 2 |
| Throw Configuration | SPDT |
| Turn On Delay Time | 20 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 12 ns |
| Off-state Isolation-Nom | 68 dB |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
ISL84762IRZ Overview
The advanced packaging method Bulk provides high reliability. 10 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. A 3V voltage supply should turn on and run the electronic component. In this multiplexer, the internal resistance is 600mOhm. The datasheets for the 10 pins explain the functions. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. The digital multiplexer has a low cost Single supply. 1.65V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 40nA. Putting voltage greater than 40nA on the multiplexer may cause damage. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. It conducts in a 2-bit manner.
ISL84762IRZ Features
1 Channels
40nA Supply Current
2-Bit
ISL84762IRZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84762IRZ Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- Video signal routing
- Digital access cross connects
- ISDN NT1/TA
- E1 Network Equipment
- Channelized and Unchannelized DS3 applications
- Cross Connects
- Fault Tolerant Systems
- Avionics
- Microwave transmission systems
