ISL84762IUZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | MSOP |
| Number of Pins | 10 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 10 |
| Resistance | 600mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Power Supplies | 1.8/3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40nA |
| Max Supply Current | 40nA |
| Throw Configuration | SPDT |
| Turn On Delay Time | 20 ns |
| Supply Type | Single |
| Bandwidth | 120MHz |
| Turn-Off Delay Time | 12 ns |
| Off-state Isolation-Nom | 68 dB |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
ISL84762IUZ Overview
Shipping overseas is convenient due to the electrical component's packing in MSOP. Total terminations are 10. Due to its 2 channels, the electrical component produces high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. This digital multiplexer has 600mOhm internal resistance. Please refer to the datasheets for 10 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 3.6V. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 1.65V. It would be sufficient to run this analogue multiplexer with 40nA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 40nA. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. There are various bandwidths available for data transfer. In an environment with a temperature higher than 85°C, the digital switches should not operate.
ISL84762IUZ Features
2 Channels
40nA Supply Current
Bandwidth: 120MHz
ISL84762IUZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84762IUZ Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- E1 Network Equipment
- Fiber In The Loop (FITL)
- High speed data transmission line cards
- Medical
- Sample hold systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Battery Powered Systems
- Mechanical reed relay replacement
- Battery-powered systems
