ISL84780IR-T
| Parameters | |
|---|---|
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Resistance | 600mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 1.8/3V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 1.6V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Operating Supply Current | 50nA |
| Throw Configuration | SPDT |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.0015mA |
| Off-state Isolation-Nom | 68 dB |
| On-state Resistance Match-Nom | 0.13Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Signal Current-Max | 0.3A |
| Height Seated (Max) | 1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | QFN |
| Number of Pins | 16 |
| Published | 2001 |
| JESD-609 Code | e0 |
ISL84780IR-T Overview
As the electronic part is packed in QFN, international shipping is convenient. Totally, there are 16 terminations. A electrical component with 1 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. A total of 16 pins are injected into the body of the electronic part. A 4 circuit is present in this switch device. There is 600mOhm internal resistance in this digital multiplexer. Datasheets for functions of 16 pins are available. There is Multiplexer or Switches analog multiplexer like this in the world. A analog switch ic that has a cost-effective Single supply type. In order to operate this switch device, it would need a current of 50nA. A temperature above 85°C is not suitable for operation of the analogue multiplexer. To power the multiplexer ics, the voltage must be set at 1.6V.
ISL84780IR-T Features
1 Channels
50nA Supply Current
ISL84780IR-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL84780IR-T Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Communication systems
- Microprocessor Controlled Analog Systems
- Ultrasound
- PBX interfaces
- USB 1.1 signal switching circuits
- E1 Multiplexer
- Low-Voltage
- Frame Relay Equipment
