ISL84780IRZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QFN |
| Number of Pins | 16 |
| Packaging | Bulk |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| Resistance | 600mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Operating Supply Voltage | 3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 50nA |
| Nominal Supply Current | 1.5μA |
| Max Supply Current | 50nA |
| Number of Bits | 4 |
| Throw Configuration | SPDT |
| Turn On Delay Time | 25 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 17 ns |
| Off-state Isolation-Nom | 68 dB |
| On-state Resistance Match-Nom | 0.13Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Signal Current-Max | 0.3A |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL84780IRZ Overview
Shipping overseas is convenient with the electronic component packed in QFN. In order to provide high reliability, an advanced packaging method Bulk is used. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. There is 600mOhm internal resistance in this digital multiplexer. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 3.6V. Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 1.6V. The switch device would be able to operate with 50nA current. If you put voltage higher than 50nA on the digital multiplexer, damage may occur. The electronic component can function from 3V. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. It is able to conduct in a 4-bit way.
ISL84780IRZ Features
1 Channels
50nA Supply Current
4-Bit
ISL84780IRZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84780IRZ Analog Switches & Multiplexers ICs applications.
- Communications systems
- Digital Cross-Connects
- Power routing
- Data switching
- Multi-Line E1 Interface Cards
- ATM
- Central office
- Voice over IP/DSL – Integrated Access Devices, Smart
- PDH Multiplexers
- Automatic test equipment
