ISL84781IRZ

QUAD Analog Switches BREAK-BEFORE-MAKE 1.8V QFN

Manufacturer: Intersil (Renesas Electronics America)
Nocochips NO: 391-ISL84781IRZ
Package: QFN
Datasheet: PDF
Stock: 305
Description: QUAD Analog Switches BREAK-BEFORE-MAKE 1.8V QFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Package / Case	QFN
Number of Pins	16
Packaging	Bulk
Published	2001
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	2
Number of Terminations	16
Resistance	750mOhm
Terminal Finish	Matte Tin (Sn) - annealed
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Temperature Grade	INDUSTRIAL
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	3.6V
Min Supply Voltage	1.6V
Operating Supply Current	50nA
Nominal Supply Current	1.2μA
Max Supply Current	50nA
Throw Configuration	8PST
Propagation Delay	34 ns
Turn On Delay Time	16 ns
Logic Function	Demultiplexer, Multiplexer
Supply Type	Single
Bandwidth	52MHz
Turn-Off Delay Time	14 ns
On-state Resistance Match-Nom	0.1Ohm
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	33ns
Switch-off Time-Max	25ns
Signal Current-Max	0.3A
Height	750μm
Length	3mm
Width	3mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

ISL84781IRZ Overview

The electronic component is convenient to ship overseas because it is packed in a QFN. High reliability is achieved by using advanced packaging method Bulk. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 8 channels. An 1.8V voltage supply should allow the electrical part to be turned on and run. The multiplexer consists of 1 circuits. An switch multiplexer with 750mOhm internal resistance has a value of 750mOhm. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 3.6V voltage to the switch device. Analogue multiplexer with a Single supply type that is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 1.6V. For this digital switch to work, 50nA current would suffice. The switch multiplexer may be damaged if it is exposed to voltage greater than 50nA. In 52MHz-bandwidths, data can be transferred. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer.