ISL84781IVZ-T7A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISL84781 |
| Pin Count | 16 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| On-State Resistance (Max) | 750mOhm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 4nA |
| Channel Capacitance (CS(off), CD(off)) | 65pF 470pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Time (Ton, Toff) (Max) | 25ns, 23ns |
| Charge Injection | -39pC |
| Channel-to-Channel Matching (ΔRon) | 120m Ω |
| Switch-on Time-Max | 33ns |
| Switch-off Time-Max | 25ns |
| Voltage - Supply, Single (V+) | 1.6V~3.6V |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
ISL84781IVZ-T7A Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Extended operating temperature around -40°C~85°C TA. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 1 channels. A 1.8V voltage supply should turn on and run the electronic component. The electrical component body receives 16 pins. A 1 circuit is present in this switch device. Try searching with ISL84781 to find analog multiplexer variants. This analogue multiplexer requires a voltage of 1.6V~3.6V when it drains from a single voltage supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC.
ISL84781IVZ-T7A Features
1 Channels
ISL84781IVZ-T7A Applications
There are a lot of Renesas Electronics America Inc. ISL84781IVZ-T7A Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Routers
- High reliability control systems
- High speed data transmission line cards
- Fiber to the Home
- Industrial and process control systems
- Battery Powered Systems
- Industrial control systems
- Frame Relay Equipment
- Sample-and-hold systems
