ISL84782IRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QFN |
| Number of Pins | 16 |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| Resistance | 750mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Operating Supply Voltage | 3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.6V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 50nA |
| Max Supply Current | 50nA |
| Throw Configuration | 4PST |
| Propagation Delay | 34 ns |
| Turn On Delay Time | 33 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Turn-Off Delay Time | 25 ns |
| On-state Resistance Match-Nom | 0.12Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.3A |
| Height | 750μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL84782IRZ Overview
As the electronic part is packed in QFN, international shipping is convenient. There are 16 terminations totally. A electrical component with 2 channels is capable of high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. A total of 16 pins are injected into the electrical part body. Analog switches have 750mOhm internal resistance. You can find the functions of the 16 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 3.6V. An effective Single supply digital multiplexer. The lowest voltage the electronic part should receive is 1.6V. For this digital switch to work, 50nA current would suffice. Putting voltage greater than 50nA on the multiplexer may cause damage. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board. It can operate from 3V operating voltages. It is not recommended to operate the switches in an environment with a temperature higher than 85°C.
ISL84782IRZ Features
2 Channels
50nA Supply Current
ISL84782IRZ Applications
There are a lot of Intersil (Renesas Electronics America) ISL84782IRZ Analog Switches & Multiplexers ICs applications.
- Imaging
- Industrial control systems
- Battery-powered systems
- Wireless Local Loop
- SONET/SDH ADM
- Fiber In The Loop (FITL)
- Avionics test equipment
- Channelized and Unchannelized DS3 applications
- Video switching
- PCMCIA cards
