ISL8484IUZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISL8484 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Supply Voltage-Max (Vsup) | 4.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 500mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 62pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 40ns, 20ns |
| Charge Injection | 170pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
| Crosstalk | -85dB @ 100kHz |
| Voltage - Supply, Single (V+) | 1.65V~4.5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
ISL8484IUZ-T Overview
The electronic component is convenient to ship overseas because it is packed in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. In total, 10 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 10 series. On the other hand, analog switches can be constructed using SPDT switching circuits. A total of 2 circuits make up this switch device. Try searching with ISL8484 to find analog multiplexer variants. An analogue multiplexer drains from a single voltage supply at 1.65V~4.5V.
ISL8484IUZ-T Features
1 Channels
Switch Circuit: SPDT
ISL8484IUZ-T Applications
There are a lot of Renesas Electronics America Inc. ISL8484IUZ-T Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Central office
- Cable PC
- DSLAMs
- Cellular phones
- Video signal routing
- Signal routing between systems
- New designs requiring multiplexer functions
- Industrial and process control systems
- Fault Tolerant Systems
