ISL88001IH22Z-T7A
| Parameters | |
|---|---|
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.95mm |
| Power Supplies | 2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 2.75V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 325nA |
| Max Supply Current | 325nA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.19V |
| Reset Timeout | 140 ms |
| Min Reset Threshold Voltage | 2.164V |
| Max Reset Threshold Voltage | 2.216V |
| Threshold Voltage | +2.19V |
| Undervoltage Threshold | 2.164V |
| Overvoltage Threshold | 2.216V |
| Number of Monitored Inputs | 1 |
| Length | 2.92mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 3 |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
ISL88001IH22Z-T7A Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. Please refer to power management for SOT-23 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. When a supply voltage of 2.5V is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. 3 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.8V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 2.75V volts in this IC power. The supervisor's supply current is specified to 325nA. This power management requires 2/5V power to work. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 325nA. The power management monitors 1 inputs at once.
ISL88001IH22Z-T7A Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
325nA operating supply current
ISL88001IH22Z-T7A Applications
There are a lot of Intersil (Renesas Electronics America) ISL88001IH22Z-T7A Voltage Supervisors applications.
- Unattended substation automation
- Data storage applications
- Electrical fire monitoring system
- Military electronics
- Detection of phase imbalance
- Electric heating appliances
- Military communications
- Satellite navigation
- Power distribution systems of CCU
- Detection of phase loss
