ISL88001IH26Z-T7A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 3 |
| Packaging | Cut Tape |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Power Supplies | 2/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 350nA |
| Max Supply Current | 350nA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Reset Timeout | 140 ms |
| Min Reset Threshold Voltage | 2.598V |
| Max Reset Threshold Voltage | 2.662V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.598V |
| Overvoltage Threshold | 2.662V |
| Number of Monitored Inputs | 1 |
| Length | 2.92mm |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL88001IH26Z-T7A Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaged in the form of a Cut Tape, power management is easy to use. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes SOT-23 functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 3.3V. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are 3 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.8V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The supply current of the power management is 350nA. In order to operate this power management, it requires 2/5V volts of power. The maximum supply temperature is 350nA. On the power management, there are a total of 1 inputs that are monitored.
ISL88001IH26Z-T7A Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
350nA operating supply current
ISL88001IH26Z-T7A Applications
There are a lot of Intersil (Renesas Electronics America) ISL88001IH26Z-T7A Voltage Supervisors applications.
- Automotive power systems
- Microcontroller system
- Detection of phase sequence
- Power distribution systems of operating room
- Radar
- Solar power charger
- Smartphones
- Detection of phase imbalance
- Automotive permanent magnet synchronous motors
- Battery cars
