ISL88011IH544Z-TK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOT-23 |
| Number of Pins | 5 |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RESET THRESHOLD IS 4.38 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 5 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 11.5μA |
| Max Supply Current | 11.5μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.38V |
| Reset Timeout | 200 ms |
| Min Reset Threshold Voltage | 4.31V |
| Max Reset Threshold Voltage | 4.45V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.31V |
| Overvoltage Threshold | 4.45V |
| Number of Monitored Inputs | 1 |
| Reset Delay Time | 250 ms |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL88011IH544Z-TK Overview
As you can see, this power management is mounted through 5 terminals. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. In this IC management you will find SOT-23 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. Manage ics operate at 2.5V supply voltages. Surface Mount mounts IC management. The power management system can be categorized as a Power Management Circuits chip. A total of 5 pins are located on this power management. 5 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In order to maintain a stable supply current for the power management, 11.5μA is the recommended value. There are also other features in the software such as [0], just to mention a few. A maximum supply temperature of 11.5μA can be used with this power management. In total, there are 1 inputs on the power management that can be monitored.
ISL88011IH544Z-TK Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
11.5μA operating supply current
ISL88011IH544Z-TK Applications
There are a lot of Intersil (Renesas Electronics America) ISL88011IH544Z-TK Voltage Supervisors applications.
- Microprocessor system
- Display equipment
- Sensitive sensors
- Medical-specific insulation monitor
- Battery cars
- Insulation fault location system
- Electronics installed in the vehicle
- Satellite navigation
- Power communication system
- Solar power charger
