ISL9204IRZ-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | DFN |
| Number of Pins | 8 |
| Packaging | Cut Tape |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 4.3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output | 350mA |
| Adjustable Threshold | NO |
| Max Output Voltage | 4.242V |
| Voltage - Output | 4.2V |
| Max Input Voltage | 28V |
| Supply Current-Max (Isup) | 0.7mA |
| Nominal Input Voltage | 28V |
| Number of Cells | 1 |
| Charge Current - Max | 350mA |
| Length | 3mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ISL9204IRZ-T Overview
The DFN package is appropriate for it. POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this power IC employs. It is possible to access 1 channels. Currently, there are 8 pins on it. A Cut Tape case holds it. To mount this electrical component, use Surface Mount. The minimum supply voltage for this electrical part should not be less than 4.3V volts. In this case, it's a Power Management Circuits family electronic part. Its supply voltage should not exceed 10V volts. It must be greater than -40°C to activate this system battery. At temperatures below 85°C, it is recommended that it be used. The battery protector ic is powered by a volt of 5V. Always keep this transceiver ic set to 5V. On it, there are 8 pins. There must be 0.7mA more than 0.7mA current available from the supply (Isup). The output voltage of the electronic battery is 4.2V. A chip input voltage of 28V can be used to power it. Battery safety requires the battery to be powered below 350mA volts.
ISL9204IRZ-T Features
Available in DFN Package
with 8 Pins
operate supply voltage at the range of 5V
ISL9204IRZ-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL9204IRZ-T Battery Management ICs applications.
- Air conditioner
- Electric train traction batteries
- LED lighting
- Robot vacuum cleaner
- Electric cars
- Body ECU
- Shuttle robots
- PV inverter
- Consumer electronics
- Industrial drones
